It appears that your browser does not support JavaScript, or you have it disabled. This site is only viewed with JavaScript enabled.

If JavaScript is disabled in your browser, please turn it back on then reload this page.

How To

Write A Specification

Carpet Reclamation - Long Form

Specification Long Word Document (USA)
Specification Long Word Document (Canada)

SECTION 01350
SPECIAL PROJECT PROCEDURES--CARPET RECLAMATION

SPEC NOTE: This section specifies requirements for removal and recycling used carpet and scrap from new installation. Preparation of existing substrate should be specified in Section 09680.
PART 1 GENERAL
1.01     SUMMARY
  1. Section Includes:
    1. Furnishing of separate contract with Reclamation Agency for used carpet reclamation.
    2. Procedures for removal and reclamation of used carpet.
  2. Related Sections:
    1. Section 01738--Selective Demolition.
    2. Section 02222--Building Demolition.
    3. Section 09680--Floor Preparation and Carpet Installation.
1.02     SUBMITTALS
  1. Proposed dust-control measures.
  2. Proposed packing and transportation measures.
  3. Schedule of carpet reclamation activities indicating the following:
    1. Detailed sequence of removal work.
    2. Inventory of items to be removed and recycled.
  4. Reclamation agency records indicating receipt and disposition of used carpet.
1.03     QUALITY ASSURANCE
  1. Reclamation Agency: Designate the Antron Reclamation ProgramSM or agency firm providing used carpet recycling under the Antron Reclamation ProgramSM.
  2. Carpet Remover: Designate agency firm providing carpet removal services for recycling purposes.
  3. Regulatory Requirements: Comply with governing regulations. Comply with hauling and disposal regulations of authorities having jurisdiction.
    SPEC NOTE: Record off-site removal of debris and materials and provide the following information regarding the removed materials. Time and Date of Removal; Type of Material; Weight and Quantity of Materials; Final Destination of Materials.
  4. Certification: Reclamation Agency and Carpet Remover shall certify in writing that used carpet was removed and recycled in accordance with the Antron Reclamation ProgramSM.
1.04     PROJECT CONDITIONS
  1. Environmental Requirements: Obtain approval of Owner {Facilities Manager, Construction Administrator} before performing operations which generate contaminants.
PART 2 PRODUCTS

2.01     CARPET RECLAMATION AGENCY
  1. [List the Antron Reclamation ProgramSM or, the Carpet Reclamation Agency Firm]
  2. [List the Antron Reclamation ProgramSM or, the Carpet Reclamation Agency Firm]
2.02     CARPET REMOVERS
  1. [List Carpet Removal Firm]
  2. [List Carpet Removal Firm]
2.03     MATERIALS
  1. Adhesive Removal Solvents: Comply with Carpet and Rug Institute Publication 104.
    SPEC NOTE: Liquid Adhesive Removers may cause problems with new adhesive and new carpets. CRI Publication 104, Standard for Installation of Commercial Textile Floorcovering Materials, should be consulted.
  2. Used Carpet: Maintain possession of removed used carpet. Immediately remove from Site and place in container or trailer.
  3. Carefully remove, store, and protect designated materials and equipment for re-installation under other Sections or to be retained by Owner.
  4. Carpet Pad: Provide recycling of carpet padding where locally available or as designated by Reclamation Agency.
PART 3 EXECUTION

3.01     EXAMINATION
  1. Verification of Conditions: Examine areas and conditions under which Work is to be performed, and identify conditions detrimental to proper or timely completion.
    1. Do not proceed until unsatisfactory conditions have been corrected.
3.02     PREPARATION
  1. Provide, erect, and maintain barricades, lighting, and guardrails as required to protect general public, workers, and adjoining property.
  2. Vacuum used carpet before removal.
3.03     CARPET REMOVAL
    SPEC NOTE: Where appropriate, include new carpet scrap and waste in the reclamation process. Modified 3.03.B as indicated.
  1. Remove used carpet in large pieces, roll tightly, and pack neatly in container. [Include carpet scrap and waste from new installation.]
  2. Deposit only clean, dry used carpets in containers. Clean shall be defined as carpet free from demolition debris or asbestos contamination, garbage, and tack strips.
  3. Remove adhesive according to recommendations of the Carpet and Rug Institute (CRI).
    SPEC NOTE: If carpet disposal method is known, delete 3.04 or 3.05 as appropriate. If disposal method is unknown or if both are to be used, retain both articles.
3.04     CONTAINER DISPOSAL
  1. Place used carpet in 40-yd3 (30.5 m3 ) container supplied by reclamation agency. Containers are fully enclosed, front (end) loading. Place only used commercial carpeting in collection container. Container shall be kept locked or supervised.
  2. Use effective packing techniques to maximize the amount of material in the container. On average, container holds 2000 to 3000 yd2 (1672 to 2508 m2 ).
  3. Neatly stack carpet tiles or repack in cardboard boxes prior to placing in container.
  4. When container is full, contact reclamation agency to coordinate pickup and drop-off of replacement container. If container is locked for security purposes, remove the lock prior to pickup.
3.05     TRUCK TRAILER DISPOSAL
  1. Place used carpet in 53-foot (16 m) trailer supplied by Reclamation Agency. The same packing techniques should be followed for packing a container.
  2. Comply with Department of Transportation regulations for weight limits. Typical maximum weight of used carpet on the trailer is 45000 lbs (24112 kg).
  3. If packing carpet tiles, do not stack higher than 6 feet (1.8 m).
    SPEC NOTE: Edit article 3.06 as necessary to reflect any special interior conditions that exist when removing used carpet. Coordinate requirements with Demolition Section.
3.06     INTERIOR OPERATIONS
  1. Contaminants from work which occurs within a single room may be contained by sealing doors and other openings with duct tape at head, jamb, and sill.
  2. Use window exhaust systems to establish negative pressure in contaminant-producing work area, ensuring continuous flow of air into work area. Do not open windows in work area except when an exhaust fan is used. Close windows at end of each work shift.
  3. Seal exhaust system ductwork which might leak into building or mechanical systems.
  4. Damp mop hard surface floors in work area daily to minimize tracking of contaminants from work area. In carpeted areas, protect carpet with plastic and plywood; provide hard-surfaced area at entrances for daily damp mopping.
END OF SECTION


General Disclaimer
While every effort has been made to ensure that the information contained within these specifications is comprehensive and accurate, INVISTA S.à r.l. will not accept any liability for omissions or errors, and disclaim any and all liability that may be claimed arising out of reliance upon the information presented in these specifications. The user acknowledges that any reliance upon these specifications is at their sole risk and discretion. INVISTA S.à r.l. has no obligation to correct any error or omission in any portion of these specifications.

INVISTA S.à r.l. makes no representations concerning suitability or fitness for use of these specifications and expressly disclaim any and all warranties, express or implied, including without limitation warranties of fitness for a particular purpose